A comprehensive master services contract for contractors and consultants delivering projects under a statement of work. It covers definitions, payment, ownership and licensing of deliverables, acceptance testing, warranties, liability, confidentiality, termination and general terms, with e-signatures and an attached statement of work.
This Service Contract (the Agreement) takes effect on [[Document Sent Date]] between the parties below.
This contract is a starting point only. Have it reviewed by a qualified legal professional before use.
[[Company Name]]
A company registered in [State or territory]
ABN: [Customer ABN]
[[Address]]
[[Sender Company]]
A company registered in [State or territory]
ABN: [ABN]
[[Sender Address]]
The Contractor and the Customer wish to enter into a relationship in which the Contractor will provide [description of services]. In consideration of their mutual promises, and intending to be legally bound, the parties agree as follows.
In this Agreement: (a) Services means all services listed in the Statement of Work; (b) Deliverables means any tangible property, including software media, supplied to the Customer as defined in the Statement of Work; and (c) Project means the Services and Deliverables to be performed under this Agreement.
The Contractor will perform and deliver the Project in accordance with the Statement of Work attached as Attachment A, subject to this Agreement. The Statement of Work must include (i) a description of the Services and Deliverables, (ii) a delivery timeline, and (iii) a price and payment schedule.
This Agreement begins on [Start date] and continues until either party ends it in writing, or as set out in clause 11.
Projects will be completed on a fixed-price or time-and-materials basis, as specified in the Statement of Work. Any additional or unscheduled Services or Deliverables outside the Statement of Work must be agreed in writing, signed by both parties and referring to this Agreement.
All taxes (other than taxes on the Contractor's income), tariffs and similar charges imposed on or relating to the Services or Deliverables are not included in the Project price and are payable by the Customer.
The Contractor will invoice the Customer according to the payment schedule in the Statement of Work, describing the Services or Deliverables in detail. Invoices are payable within [number] days of the invoice date. Interest of [1.5]% per month, or the highest rate permitted by law if lower, may be charged on balances outstanding after [number] days. If an invoice is not paid when due, the Contractor may suspend the Services or Deliverables until it is paid.
Until the Project price is paid, the Contractor holds a security interest in each Deliverable. On request, the Customer will sign any documents needed to preserve that security interest.
The Customer has exclusive, unlimited ownership of all Deliverables created under this Agreement, except commercial off-the-shelf items, which are licensed as set out in the Statement of Work. The Customer has sole authority to obtain, hold and renew patents, copyrights, registrations or other protection for the Deliverables in its own name.
The Contractor uses, and may develop, its own methods, concepts, code sequences, formats, structures, templates, user interfaces, techniques, programme organisation, database structuring techniques and similar items (Contractor Proprietary Items). These remain the Contractor's sole and exclusive property. The Customer receives a perpetual, non-exclusive, paid-up licence to use them, on these conditions: (i) they may be used only with the products purchased under this Agreement and for their intended purpose; (ii) they may not be transferred, sold or otherwise disposed of without the Contractor's prior written consent; (iii) the Customer gains no title or ownership in them; (iv) any source code supplied is kept strictly confidential under clause 13, and any object code supplied is not copied, modified or reverse engineered; (v) all copyright notices, proprietary legends and trade marks are kept on all copies; and (vi) the licence cannot be assigned or transferred by the Customer.
If the Customer orders commercial off-the-shelf products, a separate licence agreement will form part of the relevant Statement of Work.
The Customer grants the Contractor a perpetual, non-exclusive, fully paid-up licence to use all elements of the Deliverables the Contractor creates under this Agreement, excluding content or materials provided by the Customer.
The Customer will test the Deliverables as soon as possible after receipt to confirm they perform in line with the documentation and standards in the Statement of Work. The Customer will then promptly give the Contractor either written acceptance or a written statement of nonconformities, with enough detail for the Contractor to correct them. The Contractor will redeliver corrected Deliverables within a reasonable time, and the Customer will promptly begin a new acceptance test. If the Customer gives neither written acceptance nor a statement of nonconformities within five (5) days of receiving the Deliverables or corrected Deliverables, or another period agreed in the Statement of Work, the Deliverables are deemed accepted.
For [number] days after final delivery, the Contractor warrants that the Deliverables will function substantially as described in the Statement of Work. The Contractor warrants that it has the right to transfer title in any Deliverable it assigns to the Customer and that, to the best of its knowledge, the Deliverables do not infringe any third party's intellectual property rights.
The Customer's sole remedy, and the Contractor's sole responsibility, for breach of this warranty is for the Contractor, at its option, to correct serious errors in the Services or to repair or replace nonconforming Deliverables. The Customer must notify the Contractor in writing during the warranty period, give the Contractor access to the Deliverables and promptly tell it of any change in their location. If this remedy fails, the Contractor's entire liability is limited to refunding the price of the nonconforming Deliverables. The remedy does not cover damage caused by the Customer during unpacking, events beyond the Contractor's reasonable control, or the Customer's improper installation, relocation or rearrangement of Deliverables; the Contractor may repair these at its then-current time-and-materials rates.
To the extent permitted by law, including the Australian Consumer Law, the Contractor gives no warranties other than those in this clause 7, whether express or implied, including any implied warranty of merchantability or fitness for a particular purpose. The Contractor does not warrant that software Deliverables will run without interruption or error, or on any system other than the one on which the Contractor tested them. Third-party development tools are not covered, nor is any content based on the Customer's knowledge or direction.
The Contractor's total liability to the Customer is limited to the lesser of the Customer's actual damages or the Project price paid for the Services and Deliverables that are the subject of the claim, however caused. Neither party is liable for special, indirect, consequential or incidental damages, including lost profits, revenue or data, loss of use, property damage or third-party claims, arising from the Services or use of the Deliverables. Any claim against the Contractor must be brought within one (1) year of the cause of action arising.
At its own expense, the Customer will defend, indemnify and hold the Contractor harmless against any claim that materials supplied by the Customer for use in the Project infringe a patent, trade mark, copyright or trade secret. If such materials are found to infringe, the Customer will, at its option and expense, supply non-infringing material, modify the material so it does not infringe, or obtain the right for the Contractor to keep using it. The Customer also indemnifies the Contractor against all claims, liabilities, damages and expenses, including legal fees, arising from the Customer's use of the Deliverables.
Neither party is liable for any delay or failure to perform caused by events beyond its reasonable control, including failure of the other party, government action, terrorism, natural disasters, fire, storm, flood, earthquake, riot or insurrection. Delivery and completion dates will be extended by a reasonable time to allow for the delay.
The Customer may cancel all or part of a Project by giving the Contractor [number] days' written notice. The Contractor will use its best efforts to complete or transfer the Project as the Customer directs, and will not do further work, incur further expenses or make further commitments unless agreed. The Contractor is entitled to all payments due for work done and in progress when it receives the notice, and to reimbursement for non-cancellable services and commitments, provided it gives the Customer documentation of the work completed or expenses incurred.
Terminating one Project does not affect either party's obligations under any other Project, and the rest of this Agreement remains in force.
If a party materially fails to meet its obligations, the other party may give notice requiring the default to be fixed. If it is not fixed within [number] days of the notice, the notifying party may terminate this Agreement with immediate effect. Waiving or not acting on an earlier default does not affect this right.
If the Customer's actions or inaction cause the Contractor to delay or suspend the Services, the parties will agree that either: (i) the Customer continues to make all regular payments and the Contractor resumes work as soon as reasonably possible; or (ii) the Customer pays any additional costs if the Contractor reassigns staff and extends its work schedule, without liability to the Contractor. Either way, the Contractor may invoice for all work completed before the suspension.
The parties may exchange confidential information during a Project (Confidential Information), excluding the Deliverables and information the other party could reasonably expect to receive with them. Neither party will disclose the other's Confidential Information to a third party, use it except to perform this Agreement, or copy or change it, without the other's prior written consent, and each will take reasonable steps to protect it. These obligations do not apply to information that (a) the receiving party lawfully held before this Agreement, (b) becomes public through no fault of the receiving party, or (c) must be disclosed under applicable law or a valid court order. In any proceedings, Confidential Information is presumed to be the disclosing party's protectable trade secret, and the receiving party must prove otherwise.
The Contractor may name the Customer, or use a mark identifying it as a client, on its website and marketing materials, and may issue a press release about any award under this Agreement that names the Customer. Otherwise, neither party will use the other's name or marks without prior consent, which must not be unreasonably withheld or delayed.
The Contractor may subcontract work under a Statement of Work. It remains fully responsible for its subcontractors' work as if performed by its own staff, and must have written agreements with them that include ownership and confidentiality terms at least equivalent to this Agreement.
This Agreement is governed by the laws of [State or territory], Australia.
Notices under this Agreement must be given in writing by email, post or courier to the other party at the addresses above.
If any provision is invalid or unenforceable, in whole or in part, the rest of this Agreement is unaffected. The Customer may not assign this Agreement without the Contractor's consent.
This Agreement, with any documents referred to in or expressly made part of it, is the entire agreement between the parties and replaces all earlier agreements, whether oral or written.
This Agreement may be signed electronically and in any number of counterparts, which together form one agreement. Electronic signatures are as effective as original signatures.
Signed by the duly authorised representatives of each party.
[[First Name]] [[Last Name]]
[Position], [[Company Name]]
Date: [[Document Accepted Date]]
[[Sender Name]]
[[Sender Title]], [[Sender Company]]
Date: [Date]
This Statement of Work is made between [[Company Name]] and [[Sender Company]] under the Service Contract signed on [[Document Accepted Date]].
[Describe the Services to be performed and each Deliverable, including any specifications, standards or acceptance criteria.]
| Deliverable | Description | Due date |
|---|---|---|
| [Deliverable one] | [Description] | [Date] |
| [Deliverable two] | [Description] | [Date] |
| [Deliverable three] | [Description] | [Date] |
| Item | Qty | Term | Price | Amount |
|---|---|---|---|---|
| Fixed price | ||||
| [Milestone one]Payable on [milestone or date] | 1 | One-off | $8,500.00 | $8,500.00 |
| [Milestone two]Payable on [milestone or date] | 1 | One-off | $12,000.00 | $12,000.00 |
| [Final milestone]Payable on acceptance | 1 | One-off | $6,500.00 | $6,500.00 |
| Subtotal (excl. GST) | $27,000.00 |
|---|---|
| GST (10%) | $2,700.00 |
| Total (incl. GST) | $29,700.00 |
The fixed price excludes travel expenses, which are charged at actual cost. Other direct costs, such as [description of other direct costs], are invoiced at actual cost plus administration costs. GST is shown separately where applicable.
Contact [[Sender Name]] on [[Sender Phone]] or [[Sender Email]].
© 2026 Corporate Interactive Technology Pty Ltd. Design prepared for QuoteCloud's template library. Prices are illustrative.